STAG PVC Cleaner

1. Please read this product label and refer to the TDS and SDS before use. 
2. Store and use Stag PVC Cleaner at temperatures below 40°C.
3. Prepare pipe ends as per the prescribed/specification guidelines.
4. Soak a cloth or absorbent paper towel in Stag PVC Cleaner. Wipe inside the fitting socket and outside the pipe to the depth of the fitting to remove surface dirt, grease and grime. Note: If absorbent paper is used, a new sheet is required per fitting. 
5. Allow a minimum of 1 minute to ensure surfaces are dry before joining/bonding pipes and fittings with Stag PVC Weld or an appropriate solvent-based cement. Follow the application instructions. 
6. Ensure solvent has evaporated from the cloth or absorbent paper towel before disposal in accordance with local laws.

1. Highly flammable liquid and vapour. 
2. Harmful if swallowed. 
3. May be fatal if swallowed and enters airways. 
4. Harmful in contact with skin. 
5. Causes skin irritation. 
6. Causes serious eye irritation. 
7. Harmful if inhaled. 
8. May cause respiratory irritation. 
9. May cause drowsiness or dizziness. 
10. Suspected of damaging fertility or the unborn child. 
11. Very toxic to aquatic life.

1. Obtain, read and follow all safety instructions before use. 
2. Do not use near sources of heat, ignition, open flames or sparks. No smoking, eating or drinking during use. 
3. Wear eye/face protection, solvent-resistant gloves and suitable protective clothing. 
4. Use in a well-ventilated area. 
5. Avoid contact with eyes, nose, mouth and skin. 
6. Do not inhale or breathe fumes and vapours. 
7. Close container properly and tightly after use. 
8. Wash hands thoroughly after handling. 
9. Store locked up in a cool, dry, well-ventilated area and away from all sources of ignition. 10. Keep away from children, untrained persons, pets and food items. 
10. Keep away from children, untrained persons, pets and food items.
11. Collect spillage. 
12. Avoid release into the environment. 
13. Do not dispose in drains, sewers or waterways. 
14. Dispose of waste contents and empty containers in accordance with local laws.

1. If in eyes or on skin, flush immediately with plenty of cold, clean, running water. If irritation occurs/persists, seek medical help. 
2. If inhaled, remove person to fresh air and keep comfortable for breathing. Seek medical attention. 
3. If swallowed or ingested, rinse mouth and immediately seek medical help and/or call a poison centre. Do not induce vomiting. 
4. If exposed or concerned, seek medical advice.

• MEK (78-93-3)
• Acetone (67-64-1)
• Toluene (108-88-3)

12 months from date of manufacture when stored unopened in original packaging between 4 and 35ºC, in a dry and frost-proof area.

Liquid Colours (Pty) Ltd. does not accept liability for any damage or performance as this product is used outside our control. SDS and TDS available on request. Alternatively, scan the QR code to access data sheets.